TORREYPINES Programmable Chilling/Heating Dry Bath, -20°C to 100°C, 90 to 265 V

These completely solid-state Digital, Programmable Chilling/Heating Dry Baths are versatile, reliable and easy to use. They have simple digital controls and a two-line alphanumeric display that is backlit for easy reading. The display shows both the target and actual temperatures. Additionally, it displays the timer and all programming functions.We offer two chilling/heating surface sizes for the aluminum plate that is very flat for optimal contact with the sample or sample block. When unloaded, the plate will go below 0°C in under two minutes. It will heat to 37°C in even less time. Generally, the unloaded surface will decrease temperature at about 5°C/minute. Heating rates on the unloaded plate are usually about 3°C/minute. The blocks sold as accessories range in size and mass depending upon the samples containers used. The unit can drive a block for 1.5 ml centrifuge tubes from ambient temperature to 4°C in less than 30 minutes. When used with an accessory cover these blocks can be driven below 0°C. Temperature gradients from the center to the edge of any accessory block will be less than 0.5°C at any temperature.

• 5-program memory
• Energy-efficient Peltier design
• Digital control to 1°C from -20°C to 110°C without sample block
• Control at ambient
• Built-in data logger
• Count down timer (up to 30 days) with audible alarm and user settable Auto-Off
• RS232 I/O port for data collection
• Electronic calibration. Factory set, but user can set to any local standard
• Small, compact size. Uses very little bench space
• 12-volt DC operation. External power supply provided
• 12-month warranty
• UL, CSA and CE compliant