Toggle Nav
Toggle Nav
My Account

Hello , Sign In

TORREYPINES Digital Corrosion Resistant Programmable Stirring Hot Plates, 115VAC. 8" Ceramic

CAD $ 3,611.30
In stock
Overview
SKU
HS70

TORREYPINES Digital Corrosion Resistant Programmable Stirring Hot Plates, 115VAC. 8" Ceramic

Overview
TORREYPINES Digital Corrosion Resistant Programmable Stirring Hot Plates, 115VAC. 8" Ceramic
Overview

EchoTherm™ Model HS70 Corrosion-Resistant Fully Programmable Digital Stirring Hot Plates are the most advanced and easy-to-use units available. They are designed with a purge port for infusing an inert gas, such as lab air, into the chassis of the unit. This positive pressure inside the chassis causes the gas to flow out of any openings and prevents corrosive gasses form entering the chassis, improving unit life greatly. In manual operation, simply select the parameter to be set and scroll to the value needed. The unit will do the rest. In the programmable mode, routines can be stored for instant recall and use. The stored routine will run automatically, without attention, and exactly the same time after time.Programs can be simple or complex depending upon the need. Multiple temperatures, temperature ramp rates, stirring speeds and timed events can be stored. When run, the unit monitors the program to be sure it runs exactly as written. Complete walk-away automation.

  • 10-program memory stored in CMOS. No batteries required
  • Each program can be 10 steps, where each step includes a temperature, stirring speed, time and heating rate
  • Repeat any program 1–98 times automatically. Infinite repeats settable
  • Programmable and non-programmable operation
  • Platinum RTD temperature measurement for ±1% accuracy
  • 8” solid ceramic heater top for quick heating on a flat, white, chemically resistant surface
  • Settable to 450?C in 1? increments
  • Temperature ramping for exact heating and cooling rates
  • PID temperature control to 1°C on plate surface or solution with probe
  • Stir up to 2 liters of aqueous solutions from 100–1500 rpm
  • Timer goes up to 99 hours, 59 minutes, 59 seconds with user settable Auto-Off
  • 6” ptfe probe provided
  • Electronic calibration stored in CMOS
  • RS232 interface for control or recording data on a computer
  • NTP pipe-to-pipe, ¼” purge gas fitting on rear of chassis
  • 12-month warranty
  • UL, CSA and CE compliant
More Information
Product Type Hot Plate Stirrer
Top Size 8 x 8 in;20.3 x 20.3 cm
Top Surface Material Ceramic
Stirring Capacity 2 L
Operating Temperature Range 0 to 450 °C
Readability 1 °C
Temperature Control Type PID
Temperature Accuracy +/-1 °C
Temperature Stability 1 °C
Platinum RTD 100 ohm, in Plate and in Probe
Speed 100 to 1500 RPM
Speed Readability 1 RPM
Settability Speed 10 (Nearest) RPM
Voltage Rating 115 V ac, 50/60 Hz
Fused (Yes/No) Yes
Detachable Line Cord (Yes/No) Yes
Cord Length 6 ft;1.8 m
Standards Met UL;CSA;CE Compliant
Programmable Programmable
Control Interface Digital
Warranty 12 month
I/O Port Type RS232
Power Consumption 600 (Heater) W
Dimensions 8.0 x 11.25 x 5.0 in;203 x 286 x 127 mm
Memory Capacity 10 Programs
Individual Program Capacity 10 Steps