TORREYPINES Digital Chilling/Heating Dry Bath with Probe, -10.0°C to 110.0°C (without Sample Blocks)

The completely solid-state EchoTherm™ IC50 Digital Electronic Chilling/Heating Dry Bath is compact, versatile, reliable and easy to use. Simply use the UP or DOWN arrows on the front panel membrane switch to set the temperature desired and the unit will go to that temperature.The chilling/heating surface is a 2.875” (7.3 cm) x 4.375” (11.1 cm) aluminum plate that is very flat for optimal contact with your sample or sample block. When unloaded, the plate surface will reach below 0°C in under two minutes. It will also heat to 37°C in approximately 1 minute. This rate of chilling or heating may vary with the load (sample aluminum block) on the plate. For instance, temperatures down to 4.0°C can be reached on a solid aluminum block as large as 4” (10.2 cm) x 3” (7.6 cm) x 6” (15.2 cm) in well less than one hour. When insulated (ask us about this), these large blocks can be driven below 0°C. Temperature gradients from the center to the edge of any aluminum block mentioned will be less than 0.3°C at any temperature.

• Energy-efficient Peltier design
• Digital control to 0.1°C from -10.0C to 110.0°C w/o sample block
• Temperature settable and stable to 0.1C from -10.0C to 110.0C
• Accurate to +/- 0.2C
• Control plate surface with internal sensor
• Control sample block directly with temperature probe provided
• Control solution directly with temperature probe provided
• Control at ambient
• Hot surface indicator. Red LED on front panel illuminates at 50C and above
• 99-hour count down timer with audible alarm and user settable Auto-Off
• RS232 I/O port for computer control or data collection
• More than 30 standard sample blocks available
• Two-line, 16-character per line, backlit, alphanumeric display
• 12-month warranty
• Universal power supply provided for use anywhere in the world
• UL, CSA, and CE compliant