Hello , Sign In
Please sign in to access your order updates
Teledyne Foxy R1 Fraction Collector Operating temperature from 0 to 40 degrees C. Standard 1/16 inch OD (0.030 inch ID) tubing included for collection up to 25 mL/min. Includes (1) rack for (144) 13 mm Tubes
$9,653.28
In stock
Overview
SKUFCR1
Teledyne Foxy R1 Fraction Collector Operating temperature from 0 to 40 degrees C. Standard 1/16 inch OD (0.030 inch ID) tubing included for collection up to 25 mL/min. Includes (1) rack for (144) 13 mm Tubes
Overview
Teledyne Foxy R1 Fraction Collector Operating temperature from 0 to 40 degrees C. Standard 1/16 inch OD (0.030 inch ID) tubing included for collection up to 25 mL/min. Includes (1) rack for (144) 13 mm Tubes. (Substitution of Same-Price Racks Must Be Specified on Purchase Order.)
Overview
The One-Rack Foxy R1 Fraction Collector can be Adapted to a Broad Spectrum of Applications. The Units can Distribute Fractions into 96 Well Microplates, Standard Tube Sizes, and Bottles. For Essentially Unlimited Volumes, Funnel Racks can Direct Fluids to any Collection Vessel or Downstream Process.
- Collect Peaks of Interest Separately Using any Combination of Slope, Level, and Time Window Reliably Separates Peaks by Monitoring Detector Output, so you don’t have to Expend Glassware on No-Interest Effluent
- Collect Uniform Fractions by Time, Drop Count, or Pumped Volume
- Stores up to 8 Collection Methods
- Choice of Available Racks (Specify when Ordering)
- Coldroom-Friendly Design
- Sturdy Cast Aluminum Frame
- Easy to use Symbolic Touch Screen Interface
- Built-in Ethernet and RS-232 Communication Capabilities
- Faster Tube Changes|µL Delay Volume between Diverter Valve and Drop Former
- Flow Rates to 25 mL/minute
| Automatic Shut-Off | Rack Full, Last Tube, end of Time Window or External Signal |
|---|---|
| Certification | CE, CSA |
| Construction Materials | Cast Aluminum |
| Dimensions (H x W x D) | 14 x 12.25 x 13 in |
| Diverter Valve (3-Way) | Included |
| Diverter Valve Materials | PEEK and FFKM (Fluoroelastomer) |
| Drip Tray Materials | Polypropylene |
| Drop | 1 to 999 Drops Per Fraction |
| Drop Former Materials | PEEK |
| Funnel Racks Materials | ECTFE (Halar) or ETFE (Tefzel) Funnels |
| Inputs | Pump Counter, External Peak, Inject, Tube Advance: +3.3 to 5 VDC or Contact Closure, Active Low, 30 ms Minimum, 5 VDC Max. Analog Peak Voltage: 0 to 1.0 V Nominal, –1.2 to + 1.2 V Usuable, –5 to +5 V Max |
| Max Fraction Volume | Unlimited with Funnel Racks |
| Maximum Flow Rate | 25 mL/min Standard; 125 mL/min with Optional Accessory Package |
| Maximum Tube Height | 160 mm |
| Maximum Tube Qty | 144 12/13 Tubes mm |
| Memory | Eight Methods |
| Operating Voltage | 100 to 240 VAC, 50 to 60 Hz, 1 Ampere Maximum |
| Outputs | Pump Pause/Stop and Event (Tube Change), 300 ms: Open Collector, Active Low, 15 VDC/100 mA Maximum. |
| Peak Detection | Slope, Threshold, Three Time Windows, Combination of any of the above Collection Modes |
| Product Type | Fraction Collector |
| Racks | 1 |
| Racks Materials | Stainless Steel and Polypropylene |
| Solvent Compatibility | Aqueous and Organic |
| System Control | Front Panel Touch Screen, Ethernet or RS-232 |
| Test Tube Time Change | 0.10 to 0.58 sec (dependent on collection vessel tube advance speed) |
| Time | 00:00:01 to 99:59:59, 1 second intervals |
| Valve Pressure Rating | 0 to 28 psi |
| Volume | Up to 999 Units |
| Weight | 15.6 lb |
Create an Account
Creating an account has many benefits:
- See order and shipping status
- Track order history
- Check out faster