MEMMERT Hot Air Steriliser SN450, 449 L, 20-250°C

CAD $ 10,175.00

In stock

Overview

SKU

SN450

Overview

MEMMERT Hot Air Steriliser SN450, 449 L, 20-250°C

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Overview

The indispensable safety feature for this hot air steriliser: Setpoint Wait. This means that the programme for sterilisation only starts when the set temperature has been reached. This feature can also be used with freely positionable Pt100 temperature sensors. Here the sterilisation time only begins when the set temperature has been reached at all measurement points, and reliable sterilisation is guaranteed at all time

Technical Specifications

More Information
Accessory Type	Steriliser
Altitude of Installation	Max. 2,000 M Above Sea Level
Ambient Temperature	+5 °C to +40 °C
Autodiagnostic System	For Fault Analysis
Calibration	Three Freely Selectable Temperature Values
Controlcockpit	Singledisplay. Adaptive Multifunctional Digital PID-Microprocessor Controller With High-Definition TFT-Colour Display
Operating Temperature Range	5 to 250 °C
Power Supply	400 V;3 Phase;50 Hz;5800 W
Weight	161 kg
Warranty	3 yr
Dimensions	1224 x 1247 x 784 mm
Material	Zinc-Plated Steel
Relative Humidity	Maximum 80 (Non-Condensing) %
Door	Fully Insulated Stainless Steel Doors With 2-Point Locking (compression Door Lock), Lockable
Fresh Air	Admixture of Pre-Heated Fresh Air By Electronically Adjustable Air Flap
Maximum Loading of Internal	30 kg
Housing	Rear Zinc-Plated Steel
Humidity RH	Max. 80 %, Non-Condensing
Interior	Easy-To-Clean Interior,Made of Stainless Steel, Reinforced By Deep Drawn Ribbing With Integrated and Protected Large-Area Heating on Four Sides
Internals	2 Stainless Steel Grid(S), Electropolished
Language Setting	German, English, Spanish, French, Polish, Czech, Hungarian
Maximum Loading of Chamber	300 Kg
Maximum Loading Per Internal	30 Kg
Maximum Number of Internals	8
Net Weight	Approx. 161 Kg
Overvoltage Category	II
Pollution Degree	2
Programming	Atmocontrol Software for Reading Out, Managing and Organising The Data Logger Via Ethernet Interface (temporary Trial Version Can Be Downloaded). USB Stick With Atmocontrol Software Available As Accessory (on Demand).
Set Up	The Distance Between The Wall and The Rear of The Appliance Must Be at Least 15 Cm. The Clearance From The Ceiling Must Not Be Less Than 20 Cm and The Side Clearance From Walls or Nearby Appliances Must Not Be Less Than 5 Cm.
Setting Accuracy Temperature	Up to 99.9 °C: 0.1 / From 100 °C: 0.5
Setting Temperature Range	+20 to +250 °C
Temperature Sensor	1 Pt100 Sensor Din Class a In 4-Wire-Circuit
Timer	Digital Backwards Counter With Target Time Setting, Adjustable From 1 Minute to 99 Days
Vent	Vent Connection With Restrictor Flap
Voltage Electrical Load	400 V and 3x 230 V W/O Neutral, 50/60 Hz Approx. 5800 W
Volume	449 L
Working Temperature Range	At Least 5 Above Ambient Temperature to +250 °C
Works Calibration Certificate	Calibration at +160°C
Adjustable Parameters	Temperature (Celsius or Fahrenheit), Air Flap Position, Programme Time, Time Zones, Summertime/Wintertime
Installation	On Lockable Castors
Convection	Natural Convection

Downloads

Technical Data Sheets

Accessories

No Records Found

MEMMERT Hot Air Steriliser SN450, 449 L, 20-250°C

Overview