Hello , Sign In
Please sign in to access your order updates
Jenco Analyzer Graphic Display, 3-Relays, Ip-65 Case, RS-485 Interface (Conductivity, Temperature, 4-20 mA, 1/4-Din Panel Mount)
$888.72
In stock
Overview
SKU6308CT
Jenco Analyzer Graphic Display, 3-Relays, Ip-65 Case, RS-485 Interface (Conductivity, Temperature, 4-20 mA, 1/4-Din Panel Mount)
Overview
Jenco Analyzer Graphic Display, 3-Relays, Ip-65 Case, RS-485 Interface (Conductivity, Temperature, 4-20 mA, 1/4-Din Panel Mount)
Overview
Conductivity/salinity analyzer, 1/4 DIN panel mount single parameter analyzer with an IP65 case, and 4-wire cells. Has programmable reference temperature and coefficients. The 4 to 20 mA output is fully programmable, reversible and isolated. There are 2 programmable relays for conductivity/salinity and one relay for temperature and an RS-485 (modbus) interface. Password & ID protected. Graphical display. 115/230 V AC.
- RS-485 (modbus) output
- Programmable relays for conductivity/salinity
- Reversible and isolated 4 to 20 mA output
- Programmable relay for temperature
- Conductivity/salinity/temp. measurement & control
- Simultaneous analysis and display for measurement and controls
- User programmable reference temperature temperature coefficient
- 4-wire cells for long cable length & wide measurement range
| Dimensions | 1/4 DIN, depth 148 mm |
|---|---|
| Display | Graphic LCD w/backlight |
| Power | 115 V AC or 230 V AC 50/60 Hz |
| Reference Temperature | 10 °C to 29 °C |
| Temperature Accuracy | ±0.3 °C |
| Temperature Coefficient | 0.00 % to 4.99% |
| Temperature Range | -10.0 to 120°C |
| Temperature Resolution | 0.1 °C |
| Maximum Load | 500 ohm |
| ATC Sensor | Thermistor 10k ohms at 25 °C |
| Basic cell constant | 0.475 |
| Cell Constant Range | ±30% of basic cell constant |
| Conductivity Accuracy | ±0.5% F.S. ± 1 digit |
| Conductivity Range | 0 uS/cm to 200.0 mS/cm |
| Conductivity Resolution | 1 μS/cm, 0.01 mS/cm, 0.1 mS/cm |
| Control Type | On/Off |
| Current Output | Isolated 4 to 20 mA |
| Digital output | RS485 (modbus) |
| Isolated voltage | 500 V DC |
| Keypad | Audio feedback |
| Output Relays Numbers | Two programmable high or low relays for conductivity, One programmable high or low relays for Temp. |
| Relay Output | 5 amps at 115 VAC, 2.5 amps at 230 VAC |
| Relay Set Point Hysteresis | User programmable |
| Salinity Accuracy | ±0.5% F.S. ± 1 digit |
| Salinity Range | 0.0 to 70.0 ppt |
| Salinity Resolution | 0.1 ppt |
| Security Protection | 4digit password |
| Weight | 950 g |
Create an Account
Creating an account has many benefits:
- See order and shipping status
- Track order history
- Check out faster