Hello , Sign In
Please sign in to access your order updates
INFORS Celltron Benchtop shaker for CO2 incubators
$6,180.19
In stock
Overview
SKUI69222
INFORS Celltron Benchtop shaker for CO2 incubators
Overview
INFORS Celltron Benchtop shaker for CO2 incubators
Overview
The Infors Celltron Orbital Shaker is specifically designed and built to perform in CO2 incubators. The Celltron has minimal power consumption of 4 watts, which means that it does not dump large amounts of heat into the incubator, so temperatures are not disrupted.
While the Celltron is inside the CO2 incubator the magnetic touch controller is outside, allowing the user to always get an overview of the operational status. The controller and the Celltron are connected with a flat cable that slips between the incubator door seals
The Celltron is made to operate in the environment typical of a CO2 incubator. It also has an antimicrobial surface and is constructed of materials that will not rust, corrode or break down after lengthy use.
An Infors Sticky Stuff adhesive mat enables the ATF Universal Platform of the Celltron to be used flexibly with various flask sizes. Even adhesion at temperatures less than 60 °C, without the need for flask clamps. A universal platform without Sticky Stuff and Flask clamps are also available if needed, as well as dedicated trays, trays with roller clamps and trays with holders for microtiter plates.
- Gentle and reliable magnetic drive, no drive belt, developed specifically for cell cultures, with snooth start and stop
- Minimal heat emission, so it does not disrupt temperature control in the incubator
- Intuitive touch controller with timer function
- Range of options for trays and fittings
- Antimicrobial surface, silver based
- Corrosion resistant, made of ABS plastic and stainless steel
| Product Type | Celltron Shaker |
|---|---|
| Dimensions (W x D x H) | 450 mm x 380 mm x 90 mm |
| Number of Batches | 49 |
| Volume | 3 L |
| Maximum Load | 2,5 kg |
| Temperature | 4 °C to 60 °C |
| Standard Parameters | Rotation Speed, Timer |
| Voltage Rating | 110/230 V |
| Frequency Rating | 50-60 Hz |
| For use with | CO2 Incubators |
| Resistant Properties | Corrosion |
| Drive | Magnetic, Beltless, Watertight |
| Shaking Speed | 20 - 200 rpm |
| Orbital Throw | 25 mm |
| Accuracy | ± 1 of maximum speed |
| Humidity | Up to 98 non-condensing (Touch Controller to 60) |
| Load Capacity | 3.5 kg |
| Power Rating | 14 W |
Create an Account
Creating an account has many benefits:
- See order and shipping status
- Track order history
- Check out faster