Hello , Sign In
Please sign in to access your order updates
Hamilton VISIFERM MA 225 H3
$4,062.90
In stock
Overview
SKU10070760-1311
Hamilton VISIFERM MA 225 H3
Overview
Hamilton VISIFERM MA 225 H3
Overview
Designed especially for production environments, the new VisiFerm mA is a 2-wire sensor with 4-20 mA standard or digital HART signal output, and ATEX & IECEx approval. The new VisiFerm mA mitigates the negative effects of aging, temperature, and photobleaching in order to reduce the frequency of calibration and deviation reports
- Longer cap and sensor life
- Less frequent calibrations
- Easy installation with 2-wire connection
- Direct analog 4-20 mA or digital HART communication
- Calibration, verification, and maintenance data accessible via ArcAir app
| 4 to 20 mA Accuracy | < 0.3 % current value + 0.05 mA |
|---|---|
| 4 to 20 mA Current Range | 3.5 to 22 mA |
| ATEX Approval | ll 1 G Ex ia llC T3/T4/T5/T6 Ga; II 1 D Ex ia IIIC T135°C Da |
| Accuracy at 25 °C | 1 ± 0.05 %-vol: 21 ± 0.2 %-vol; 50 ± 0.5 %-vol |
| Analog Interface 1 | Two wire sink 4 to 20 mA for DO, programmable |
| Autoclavable | Yes |
| CIP | Yes |
| Configurable Values | DO: mbar; %-sat; %-vol; µg/l; mg/l; ppb/ppm (gas); ppb/ppm (dissolved oxygen); Temperature: °C |
| Diameter | 12 mm |
| Digital Interface | Bluetooth 5 \nHART Version 7.0 |
| Drift at Room Temperature | < 1 % per week |
| Electrical Connector | M12 |
| IECEx Approval | ll 1 G Ex ia llC T3/T4/T5/T6 Ga; II 1 D Ex ia IIIC T135°C Da |
| Measurement Principle | Oxygen dependent luminescence quenching, temperature compensation |
| Measuring Range | 4 ppb to 25 ppm (DO) 0 to 62.85 %-vol or 0 to 300 %-sat |
| Operating Temperature Range | -20 to 140 °C; the sensor provides no DO reading above 85 °C |
| Operating Voltage | 18 to 30 VDC |
| Pressure Range | -1 to 12 bar |
| Process Connection | PG13,5 |
| Protection Rating | IP 68 |
| Response Time | t98% < 30 s at 25 °C |
| Sensor Cap | ODO Cap H3 |
| Sensor Family | VisiFerm mA |
| Serial Number | Yes |
| Steam Sterilizable | Yes, Maximum Temperature 140 °C |
| Surface Quality of Steel | Ra < 0.4 µm (N5) |
| Temperature Sensor | NTC 22 kOhm |
| Transmitting Power | Maximum 4 dBm |
| Wetted Parts | Stainless Steel 1.4435 \nEPDM (Ethylene propylene elastomer) \nVMQ (Silicone elastomer) |
| Length | 215 mm |
No Records Found
Create an Account
Creating an account has many benefits:
- See order and shipping status
- Track order history
- Check out faster