Hello , Sign In
Please sign in to access your order updates
Hamilton Visiferm DO ARC 120 H0
$3,918.48
In stock
Overview
SKU243666-111
Hamilton Visiferm DO ARC 120 H0
Overview
Hamilton Visiferm DO ARC 120 H0
Overview
The VisiFerm DO is the first optical oxygen sensor with integrated opto-electronics, having the full functionality of a measuring device with self-diagnostics. It is steam sterilizable, autoclavable and CIP compatible. The VisiFerm requires less maintenance than a classical oxygen sensor as it does not have a mechanically sensitive membrane or a corrosive electrolyte
- No fragile membrane – with a solid sensor cap
- No polarization time required
- Instantly stable values, low drift, quick response
- Electrolyte-free, so no leakage
- Convenient precalibration in the laboratory, because data is stored in the sensor head
| Sensor Output | Traditional: mA |
|---|---|
| Diameter | 12 mm |
| Length | 120 mm |
| Operating Temperature Range | -10 to 140 °C; the sensor provides no DO reading above 85 °C |
| Pressure Range | -1 to 12 bar |
| ATEX Approval | No |
| Accuracy at 25 °C | 1 ± 0.05 %-vol: 21 ± 0.2 %-vol; 50 ± 0.5 %-vol |
| Analog Interface 1 | 4 to 20 mA for DO, programmable, galvanically not isolated; pulse width modulation 5 kHz |
| Autoclavable | Yes, Maximum Temperature 130 °C |
| Baud Rate | 4800, 9600, 19200, 38400, 57600,115200 Bd |
| CIP | Yes |
| Configurable Values | DO: mbar; %-sat; %-vol; µg/l; mg/l; ppb/ppm (dissolved oxygen); Temperature: °C, °F, K |
| Digital Interface | RS485 Modbus (Maximum 31 addresses) |
| Drift at Room Temperature | < 1 % per week |
| Electrical Connector | VP8 |
| IECEx Approval | No |
| Measurement Principle | Oxygen dependent luminescence quenching, temperature compensation |
| Measuring Range | 4 ppb to 25 ppm (DO) 0 to 62.85 %-vol or 0 to 300 %-sat |
| Operating Voltage | 7 to 30 VDC Maximum 1 W |
| Parameter | DO (Optical) |
| Process Connection | PG13,5 |
| Response Time | t98% < 30 s at 25 °C |
| Sensor Cap | ODO Cap H0 |
| Sensor Family | VisiFerm |
| Serial Number | Yes |
| Steam Sterilizable | Yes, Maximum Temperature 140 °C |
| Surface Quality of Steel | Ra < 0.4 µm (N5) |
| Temperature Sensor | NTC 22 kOhm |
| Wetted Parts | Stainless Steel 1.4435 \nEPDM (Ethylene propylene elastomer) \nSilicone - FDA 21 CFR 177.2600 \nVMQ (Silicone elastomer) |
No Records Found
Create an Account
Creating an account has many benefits:
- See order and shipping status
- Track order history
- Check out faster