Oxygen Sensors, Hamilton VisiPro DO Ex Optical for Explosive Environments
Overview
The VisiPro DO is the only optical dissolved oxygen (DO) sensor for use in an explosive environment. With their integrated transmitter, VisiPro DO sensors enable direct communication to the process
control system via 2 wire 4-20 mA standard signal or digital HART. Wireless communication directly from the sensor may be used for monitoring, configuration and calibration, and can save time without compromising the quality of the wired connection.
Optical technology improves the measuring performance and simplifies maintenance. Improvements compared to conventional electrochemical (amperometric) sensors include flow independence, rapid start-up with no polarization time, and simplified maintenance. With their integrated transmitter, VisiPro DO sensors enable direct communication to the process control system via 2 wire 4-20 mA standard signal or digital HART.
All relevant sensor data including calibration and diagnostic information are stored in the sensor head, simplifying calibration and maintenance. Additional wireless communication directly from the sensor to a computer simplifies laboratory calibration, configuration, and maintenance.
Features of the VisiPro DO EX sensors:
ATEX EC type Examination Certificate for use in explosive atmosphere
Suitable for steam sterilization, and CIP
Flow independent self diagnostics
Electrolyte-free, so no leakages occur
No polarization time required
Easily replaceable sensor cap containing the sensing element
Specifications (Click here):
Oxygen Sensors, Hamilton VisiPro DO Ex Optical for Explosive Environments
Specifications
Model:
VisiPro DO Ex 120, 215, 325, 425
Length: (mm)
120, 225, 325, 425
ATEX Certification:
Yes, Ex II 1G Ex ia IIC T6/T5/T4/T3 Ga, IECEx Certificate of Conformity
Accuracy at 25° C: (%-vol)
1 ±0.05, 21 ±0.2, 50 ±0.5
4-20 mA accuracy: (% + mA)
< 0.3 current value + 0.05
4-20 mA current range: (mA)
3.5 to 22
Analog Interface
Two wire sink needs to be powered by external power supply
Analog Interface 1: (mA)
4-20 for DO, programmable
Autoclavable:
No
Cleaning in place mode (CIP):
Yes
Configurable values, DO:
DO: mbar; %-sat; %-vol; μg/L; mg/L; ppb; ppm
Configurable values, temperature:
°C
Diameter: (mm)
12
Digital HART Interface:
Yes, version 7.0
Drift at Room Temperature, constant conditions: (% per week)
< 1
Electrical Connector:
M12
Electrolyte:
none
Measurement Principle:
Oxygen dependent luminescence quenching
Measuring Range, DO: (ppb)
4 to 25
Measuring Range, pO2: (mbar)
0.1 to 600
Operating Temperature Range: (°C)
-10 to 140, no DO reading over 85
Operating Voltage: (VDC)
18 to 30
Pressure Range: (bar)
0 to 12
Response Time t98% at 25°C, from air to nitgrogen: (s)
< 30
Process connection:
PG 13.5
Protection rating:
IP68
Steam Sterilizable:
Maximum temperature 140 °C
Temperature sensor:
NTC 22 kOhm
Add to Cart
Number
Description
Price $
243400
VisiPro DO Ex 120 optical oxygen sensor, 120 mm, for use in an explosive environment
Inquire
243401
VisiPro DO Ex 225 optical oxygen sensor, 215 mm, for use in an explosive environment
Inquire
243402
VisiPro DO Ex 325 optical oxygen sensor, 325 mm, for use in an explosive environment
Inquire
243403
VisiPro DO Ex 425 optical oxygen sensor, 425 mm, for use in an explosive environment
Inquire
242427
ODO Cap P0, contains embedded luminophore
270.00
243510
ODO Cap P1, contains embedded luminophore, designed for fermentation processes in which sterilization in place (SIP) is performed in media with higher amounts of lipophilic compounds
Inquire
243515
ODO Cap H0, contains embedded luminophore, for use with VisiPro DO Ex explosive environment optical sensors
Inquire
243500
ODO Cap H1, contains embedded luminophore, for DO Ex explosive environment sensors, designed for fermentation processes in which sterilization in place (SIP) is performed in media containing higher amounts of lipophilic compounds
Inquire
243505
ODO Cap H2, with a hygienic design for fermentation processes in which sterilization in place (SIP) is performed in media containing higher amounts of lipophilic compounds
Inquire
242411
USB-ModBus RS 485 converter
178.20
242410
VisiCal™ calibration and maintenance tool to calibrate VisiFerm DO and Arc sensors and monitor their status, VP 8 connectors allow installation between the sensor and a VP 8 sensor cable
773.30
243498
Arc Wireless Converter Modbus, for wireless communication from Hamilton Device Manager (HDM) to Arc sensors
Inquire
243499
Wireless Converter BT, designed for wireless communication between HDM (Hamilton Device Manager) and VisiPro DO Ex explosive environment sensors.
Inquire
242170
Arc Wi Sensor Adapter, is mounted between the VP head of an Arc sensor and a VP sensor cable, provides wireless communication with the Arc View Handheld
Inquire
243030
Arc Wi 2G Adapter, wireless Arc sensors to Process Control System
Inquire
242180
Arc View Handheld and Dock, communicate with up to 31 sensors wirelessly, or hard wire to one sensor through dock, monitor, calibrate, and configure
Inquire
355298-03
Arc Sensor Cable with M8 4-pole socket, for sensor connection to Arc View Handheld Dock, NA connector
Inquire
242412
4-20 mA galvanic isolating amplifier M1
Inquire
242413-03
VisiFerm D4 power adapter, connects VisiFerm DO in ECS mode to the cable of classical sterilizable oxygen sensor with four-pole plug, includes wall plug power supply, NA plug
Inquire
355194-03
Demo cable VP 8 for demonstration of Arc sensors, with power supply, device end open, NA plug
237.60
238999-2767
VisiFerm Demo Cable (1 m. Applikon BNC Connector, Euro Plug power supply)
297.00
238999-2768
VisiFerm Demo Cable (1 m. New Brunswick AMP Connector, Euro Plug power supply)
334.80
238999-2766
VisiFerm Demo Cable (1 m. Sartorius-BBI Lemo Connector, Euro Plug power supply)
Inquire
355217
Sensor cable VP8 I m
Inquire
355245-03
Sensor Power Cable for control systems or transmitters with AMP connector, NA plug, 2.5 m
Inquire
355218
Sensor cable VP 8 3 m
Inquire
355219
Sensor cable VP 8 5 m
Inquire
355220
Sensor cable VP 8 I0 m
Inquire
355221
Sensor cable VP 8 I5 m
Inquire
355222
Sensor cable VP 8 20 m
Inquire
238999-2394
Sensor cable VP8 I m
Inquire
238999-1953
Sensor cable VP 8 3 m
Inquire
238999-2395
Sensor cable VP 8 5 m
Inquire
238999-2396
Sensor cable VP 8 I0 m
Inquire
238999-2403
Sensor cable VP 8 I5 m
Inquire
238999-2505
Sensor cable VP 8 20 m
Inquire
355283
Sensor Cable M12, open end, for connection to a data recorder, indicator, control unit or PCS (Process Control System) with analog I/O, 3 m
Inquire
355284
Sensor Cable M12, open end, for connection to a data recorder, indicator, control unit or PCS (Process Control System) with analog I/O, 5 m
Inquire
355285
Sensor Cable M12, open end, for connection to a data recorder, indicator, control unit or PCS (Process Control System) with analog I/O, 10 m
Inquire
355288
Sensor Power Cable M12, includes a power adapter to supply sensor with operation power in non-hazardous environments, 3 m
Inquire
355245-03
Sensor Power Cable for systems or transmitters with Lemo connector, NA plug, 2.5 m
Inquire
355258-03
Sensor Power Cable for systems or transmitters with Binder connector, NA plug, 4 m
Inquire
355297-03
Sensor Power Cable for control systems or transmitters with BNC connector, NA plug, 1 m
Inquire
355245-03
Sensor Power Cable for control systems or transmitters with AMP connector, NA plug, 2.5 m
